The mountune Track-Spec Front Brake Pad Upgrade range has been developed for mk2 Focus RS owners looking for the ultimate in braking performance for use on track, whilst retaining their OE braking setup.

The specific track pad compound used provides good initial bite from cold, is still kind to discs, but offers a huge friction level whilst resisting brake fade in excess of 750ºC.

This is the perfect brake pad for track days, hill climbs and racing applications where performance and resistance to brake fade is paramount.

Features:

• Huge friction level
• Resistance to brake fade in excess of 750ºC
• Suitable for track day use
• Direct swap for OE pad
• Perfectly matched to mountune front grooved discs

Bedding-in:

The following steps should be followed to correctly ‘bed-in’ your new brakes.

Brake pad/ disc replacement will initially reduce your vehicle's braking performance until fully ‘bedded’ in. 

Step 1 - Gently drive approximately 250 urban miles (not motorway miles where brakes are used less) to allow the pads to coat the surface and establish full contact with the disc face. 

Step 2 - Ensuring it is safe and legal to do so, perform 8 stops from 70mph to 30mph at 300-yard intervals followed by coasting to allow the brakes to cool. 

Discs / pads can take up to 1200 miles to fully bed in, during which time it is perfectly normal to experience a degree of smoke, odour or squeal.

Please note: Due to the aggressive nature of this pad compound, they do not carry the same R90 approval as our road designated pads. Therefore they are recommended for track use only.