HQ-2592-400-BLK

Mk3 Focus RS m400R Power Upgrade Kit - Fully Fitted at mountune HQ

The mountune m400R power upgrade optimises the performance available from the 2.3-litre EcoBoost, whilst running a standard turbo.

Utilising a selection of fully proven mountune hardware - some of which endorsed by Ford themselves, to help lower charge temperatures, improve pressure drops and remove back-pressure, means the engine is now able to operate more efficiency, allowing the impressive peak 400PS and 560Nm power and torque output to be more safely, and reliably achieved.

As with all mountune power upgrade kits, m400R is available as a complete power upgrade from standard, but equally continues the modular approach, allowing owners to add the required hardware in stages, before culminating in what’s undoubtedly the most well-rounded performance upgrade available, that retains the standard turbocharger.

From both years and hundred’s of thousands of miles of product development and durability testing of the RS-spec 2.3-litre EcoBoost engine, mountune’s knowledgebase is unequalled regarding the engine and also, the calibrations strengths and limitations.

It’s from this rich test bed of data that m400R has been formed. Upgrading hardware that would otherwise be beyond its safe operating point to ensure maintainable, repeatable performance and calibrating to retain the maximum possible drivability, and ultimately, reliability.

The m400R mTune also includes a host of new features and functionality (see below) as well as an OE power and fuel economy calibration.

Kit Contents:

  • High-flow induction kit
  • Sound Suppression Chamber (SSC)
  • Uprated turbo re-circ valve
  • High-flow hard pipe
  • High-performance alloy intercooler
  • 3" downpipe with 200-cell sports catalyst
  • 3" V3 cat-back exhaust
  • mTune handset with m400 calibration
  • Two mountune badges

mTune Features:

  • Supplied complete with four user-interchangeable calibrations
  1. Map slot 1 = m400R Calibration
  2. Map slot 2 = OEM power
  3. Map slot 3 = Fuel economy calibration
  4. Map slot 4 = Valet mode calibration

Additional functionality:

  • Adjustable RPM limit
  • Full-time launch control (no need to activate via the menu system)
  • Adjustable launch RPM setpoint
  • Full-throttle (no throttle lift) gear change
  • Valet and anti-theft modes
  • Dyno mode (RDU On / Off)
  • Full access to all OBD channels to use with custom gauges / data-logging
  • In-field calibration updates
  • 0-60 times
  • ¼ mile times
  • Monitor all available OBD channels
  • Adjustable shift light
  • Full data-logging
  • DTC reading / clearing
  • Soft touch rear case
  • LCD screen
  • Ambient light sensor

    Please Note: The warranty of the vehicle being updated with this upgrade may be affected. The m400R upgrade kit is not Ford-endorsed.

    To maintain any warranty provision otherwise entitled to you, and to ensure correct operation, reliability and performance figures quoted are achieved, calibrations loaded via an mTune handset must be installed together with the correct mountune® hardware.

    mountune highly recommend the installation of forged pistons and uprated conrods when upgrading to m400R, or beyond this power / torque output.

    Please note: the price shown for this product includes installation* at mountune HQ in Hutton, Essex and is nottransferrable to any other Ford dealer or installer.

    Please specify your preferred installation date in the 'notes' section when checking-out; our workshop team will then contact you back to confirm this date. If we can't accommodate your preferred choice, the team will discuss with you other available dates, that are still acceptable to you.

    *subject to availability. Lead times may vary. Contact us for more information.

    Customer Reviews

    Based on 1 review Write a review