The mountune Stage 1 upgrade delivers phenomenal performance for the Mk7.5 Golf R with either manual or DSG transmissions.
Based on over a decade of tuning vehicles to pass OEM sign-off, the mountune Stage 1 offers the highest quality calibration, providing improved drivability, response and of course, a substantial increase in both power and torque, all vigorously durability tested to provide peace of mind that reliability is maintained.
Power is increased to 360PS whilst torque is raised to 500Nm, which is enough to drop the 0-60mph sprint to a staggeringly quick 3.7secs (DSG with mountune TCU cal).
It also boasts enhanced vehicle functionality, can be used to monitor gauges via the OBD port, and also includes a performance meter as well.
A return to stock option is included, together with an anti-theft option.
The mountune Stage 1 is available in two versions to fully exploit both manual and DSG transmissions. The DSG version also includes a fully optimised transmission calibration option (you can choose this option above). This is programmed into the TCU (transmission control unit) by the SMARTflash app, which then allows it to maintain higher torque levels through the revised clutch pressure optimisation. Shifts are faster, giving harder and quicker acceleration through the gears, whatever level of performance your car has and the launch control benefits from a revised, more aggressive strategy.
For manual owners that don't want to fit an uprated clutch kit, the mountune Stage 1 R calibration includes multiple selectable torque modes within the performance calibration as standard, so you can still safely run increased levels of performance without the fear of near instant clutch-slip.
Whilst not essential, it is recommended to achieve and maintain the quoted power figures under hard use, an aftermarket induction system should be used, like the mountune X3, which the Stage 1 calibration has been fully optimised for.
• Power increased to 360PS
• Torque increased to 500Nm
• Supplied as standard with Stage 1 calibration (featuring multiple torque mode outputs, return to stock, anti-theft and valet options
• DSG version includes optional mountuneTCU calibration fully optimised for DSG-equipped vehicles
• Enhanced launch control
• ECU and TCU data-logging
• Performance meter
• OBD gauge display
• Fault code reader
• Easy DIY installation
In the box:
• SMARTflash OBD bluetooth adaptor
• Zip-up mountunecase
• mountune badge
Please Note: Whilst every effort is made to provide calibration support for all known available base variants, due to the number in existence, there may occasionally be a delay in enabling support for your vehicle. Should this be the case, options to provide this support will be made available, or you will be offered a full refund until specific calibration for your vehicle can be provided.
The mountune Stage 1 calibration dramatically improves power and torque output across the entire rev-range; peak power is increased to 360PS, with torque raised to 500Nm.
It also features a host of additional features and functionality accessible via the SMARTflash app.
For maximum performance the mountuneStage 1 should be used together with a high-flow intake and is optimised to work with the mountuneX3; the pressure drop achieved using this setup removes yields further improvements in peak performance, throttle response and also enhances induction noise.
Power figures achieved using 99RON fuel (Stage 1 is safe to use with 95RON). Power output may vary based on individual vehicle condition, fuel quality and method of testing.
The mountune DSG TCU calibration works in harmony with the Stage 1 engine calibration to fully exploit the maximum available vehicle performance and engine torque output.
Our SMARTflash OBD Bluetooth interface and SMARTflash app allows you to easily reprogram the gearbox's calibration inside the TCU (Transmission Control Unit). This allows the transmission to maintain higher torque levels through the revised clutch pressure optimisation.
Shifts are faster, giving harder and quicker acceleration through the gears, whatever level of performance your car has.
The driving mode strategy itself is also optimised to suit higher power levels, giving a more coherent gear selection profile. Switch the controls over to manual and you'll have real gear control, quite literally at your fingertips - no automatic upshifts, no kick down until you decide you want it.
In addition, launch control will get you off the line quicker through allowing more boost at launch and increased launch RPM.
Easy installation and quick switch different torque programs, also available multi functional tools such as gauges , data logging and diagnostic…
First time experiencing a stage 1 car... First of all, the process. Looked at a few different companies but I chose Mountune for the ease of setup and bonus features such as return to stock, antitheft and RPM limiter options. Went for ECU and TCU tune as I feel everyone should to cope with clamping pressures. Unlocking ECU took around 15 minutes. The actual maps no time at all. Instructions clear as day. Now over to performance....Wow. the shifts are lightening, torque is immediate and even some added pops and bangs when lifting off as a nice bonus. Mountune storming into the *** world. Long may it continue.
Just applied this to my Golf R 7.5 and wow what a difference. I looked at all options but i like i could put it back to stock if needed. I have the Air Box and went for the Gearbox Map too. Just been out for a quick drive and it feels so different from the second i pulled away once on the open road it pulls so much more aggressive to standard. I have had some powerful cars over the years and this a just a daily we bought for local running around and thought it just needed a little more and it certainly gives you that. And the customer service has been amazing. Thanks guys at Mountune.. Are you going to do a exhaust anytime soon?